Serving Delaware statewide
DR Retrofit Solutions in Delaware
Convert your existing film or CR X-ray room to digital radiography, without the cost or downtime of a full new room. Based in Claymont and on call across the state.
What DR Retrofit Solutions in Delaware Include
If your X-ray room still runs on film or a CR reader, you do not have to replace the whole setup to go digital. DR retrofit solutions in Delaware let you keep the generator, tube, and stands you already own, and change only the capture side for a digital detector and software. Images land on the workstation in seconds, and your repeat rate drops.
We are based in Claymont, so a site visit anywhere in the state is a short drive rather than a regional dispatch. This page covers what a retrofit changes, what Delaware expects on the compliance side, and how the upgrade runs.
A retrofit swaps your film cassette or CR plate for a digital detector, adds acquisition software, and connects the room to your PACS or practice system. The generator, tube, table, and wall stand stay in place when they are sound, so you are upgrading the part that matters and leaving the rest alone. The film processor and its chemicals go away. If the assessment finds a worn part, we flag it before any work starts rather than after. You can read our DR retrofit service for the full picture of how we approach an upgrade.
Why Retrofit Instead of Replacing
The pull toward digital is practical, not cosmetic. A retrofit gives you most of the gain of a new room for a fraction of the outlay, and you can see the rest of the DR systems we fit if you are weighing a larger change.
Images in seconds
An exposure is on the screen before the patient is off the table, so you are not waiting on a processor.
Keep your equipment
Your generator, tube, and stands stay in place when they are in good shape. We change the capture side.
Fits your software
A standard DICOM link sends studies straight into your PACS or practice system, with a bridge if one is needed.
Delaware Compliance and Your Registration
Delaware registers diagnostic X-ray facilities through the Delaware Office of Radiation Control, part of the Division of Public Health, and inspects them at least once every two years. A retrofit is a good moment to confirm your machine record reflects the equipment actually in the room. We keep the system calibrated and your service documentation in order, so an inspection stays routine. The radiation compliance survey itself, the dose and kVp testing the state expects, is carried out by a licensed medical physicist as a separate step from our work, and we keep your ongoing equipment service aligned with it.
Where We Work in Delaware
We cover all three counties and the practice types that rely on in-house imaging: chiropractic and podiatry offices, urgent care and occupational health clinics, and veterinary hospitals. See the towns we cover for the full list.
- Wilmington
- Newark
- Middletown
- Claymont
- Dover
- Smyrna
- Georgetown
- Seaford
- Lewes
- Rehoboth Beach
- New Castle County
- Kent County
- Sussex County
In practice
A chiropractic clinic in Wilmington came to us with a film room and a daily backlog at the processor. We fitted a digital detector to the existing wall stand, connected it to their practice software, and trained the staff the same afternoon. Their images now load at the workstation before the patient is off the table.
How a Retrofit Runs
1
Assessment
We check that the generator, tube, and room are sound and worth building on, and size the detector to your work.
2
Detector and software
You get a detector and acquisition software chosen for your caseload, with no tie to a single manufacturer.
3
Install and calibrate
We fit the detector to your existing stand and calibrate exposures so image quality is right from day one.
4
Connect
We link the room to your PACS or practice system over DICOM, and set up a bridge if your software needs one.
5
Train and hand over
Your team learns the new workflow, and you get the documentation your records and next inspection will ask for.
Questions Delaware Practices Ask
01. Do I need to tell Delaware about a DR retrofit?
02. Can I keep my existing generator and tube?
03. How long is the room out of use?
04. Will my images work with my current software?
Get Your Delaware Retrofit Priced
Tell us what is in your X-ray room now and where you are in Delaware, and we will scope an upgrade that reuses what you already have. DR retrofit solutions in Delaware start with a short on-site assessment.
